Category: Bindings

Mix Phiokka Reactor Bindings are a nice solid binding…

The Mix Phiokka Reactor bindings are a nice solid binding with a firm coupling to the board and are light weight. They have a plastic lever, which is kinder to the boots then metal levers. I like them better then my Snowjam Extreme 2’s, but not as well as my Line ff pros. They have a stop on the rear bail to keep the bail up, which aids entry. The holes allow 2cm set back like the Zeros, but unfortunately the sole adjustment seems maxed out at my 11 size ski boot, thus my ski boot has to be centered on the binding and I cannot get any further set back then my Line ff pros which allow me to get a 2cm set back just because it has a larger sole adjustment range. The Phiokka Reactors are easier to move from center to 2cm back, because of the holes, then the line ff pros.

Rider – Jack Jue – Expert Skiboarder


Line FF Pro bindings are dependable…

I have ridden these bindings for about quite a few years and are still the same well built, dependable, sexy binding I purchased 5 years ago. Prior to this I had only rode Salomon bindings… so I don’t have much experiance on others, but I can say without a doubt I do not feel a need to upgrade (so I bought an extra set). I have had the suckers pop off once or twice…. usually from a really bad fall, but that could have easily been user error (not tight enough). These are a classic in the skiboarding realm.

Rider – Nathan Gorin – Intermediate Skiboarder


Line FF Pro bindings are great…

The line ff pro bindings are great. They are built really well and I have had no problems so far. These bindings are easy to adjust with an Allen wrench. The line ff pro bindings are a well made and great performing binding.

Rider – Daniel Pfisterer – Expert Skiboarder


Line FF Pro bindings are the best…

These are the best bindings I have ever ridden on, and I have also used Bomber Elites, Line FF Cams, and Snowjam Extreme IIs. I have the blue ones, and they look amazing along with performing like beasts. In the park they are extremely durable, and carving they feel amazing. These are my go-to-bindings and if you can find them, snatch em up…because they are no longer made.

Rider – Ty Bereskie – Expert Skiboarder


Line FF Pros my favorite bindings…

The Line FF Pros are my favorite bindings hands down. I’ve ridden Bombers, Snowjams, and Grooves and the FF Pros blow them away. They’re really easy to adjust to fit your boot exactly. These things are literally indestructible. I managed to get my hands on 3 sets of them and can’t see myself riding anything else for quite awhile.

There are slight variations in design between the blue FF Pros and the orange ones. Overall I prefer the design of the orange ones. Here’s a visual comparison:

As you can see two of the little rubber grips in the blue FF Pros fell out. This is no problem except when I have snow on the bottom of my boots it ices up in the empty holes. The orange version has different rubber grips that seem to stay in place better.

If you happen to stumble upon a set of these I definitely wouldn’t pass it up.

Rider – Courtney Celley – RVL8 Flow Team Rider/Expert Skiboarder


Line FF Cam bindings are solid…

These are pretty solid old bindings. They are like the FF-Pros, but not quite as well-made or solid. They are tool-less and are extremely easy to adjust, which is good if you plan on using them on a loaner pair. The only thing I don’t like about these bindings is the plastic toe piece which to me, didn’t seem like it had a great grip on my boot. These bindings also seemed relatively heavy compared to what i was used to, the pretty long. Overall a decent pair of bindings.

Rider – Ty Bereskie – Expert Skiboarder

Line FF Cam bindings are great for switching up riders on the fly…

These bindings are great for loaner boards. Being able to switch up the size to fit any boot on the fly is a great features for letting new people experience skiboarding. The bindings seem pretty solid. They don’t have the ability to be micro adjusted, so on some boots they either have to be a little loose, or really on the tight side. If they’re ridden for a while at the same size it can be somewhat difficult to adjust them. They kind of get stuck in the position they were kept in but with a little force they can be readjusted.

Rider – Courtney – Expert Skiboarder & Webmaster of Skiboardmagazine.com

Line FF Aluminum won’t leave you disappointed…

The Line FF Aluminum bindings were the first metal bindings I owned with a real pair of skiboards (not snowblades). They are entirely made of aluminum, and the length of the binding has two sets of rubber dampeners that run the length of the binding. If you are unable to afford a pair of Bomber Elites and are able to find these (or the Line FF Pros), you will not be disappointed.

There are several differences between this binding and the Bomber Elites. First and foremost, adjustments to the toe/heel bails are made with teeth. These teeth make adjusting the bindings very easy. The drawback that I’ve found is after years of wear and tear, the teeth can get dull and eventually not hold as well as they should.

The bails are not as tough and not as sturdy as the Bomber Elites. They hold great, but just not as tight as the Bomber Elites. The toe clips on the FF Aluminums don’t quite seem as tough as the Bomber Elites.

The Bomber Elites are mounted directly onto the skiboard, with the rubber dampeners being on the toe and heel while the Line bindings have rubber dampeners that run the full length of the binding, so there is more dampening material.

Overall, they are a great binding that one can’t go wrong with. If you can’t afford a pair of Bomber Elites, want non-releaseable bindings, and are able to find these or the FF Pros, get them.

Rider – Edward Ho – Expert Skiboarder

Bomber Elite 2 gives great response…

Once again, I need to compare these to my other set SnowJam Extreme II head to head one day, but the solid interface on these to the boards, gives great response. My one gripe about the bindings isn’t performance at all, it’s just that they aren’t nearly so easy to micro-adjust. That was my problem earlier this season, I thought that I had had both well adjusted to my boots, but they weren’t actually tight enough, and was releasing on any hard impact when I was coming off jumps or rails. Now that I’ve got them well adjusted to my boots, I’ve not had that trouble at all, but there’s no way I’m gonna be lending those out, just due to the fact It’s a pain in the butt to equally adjust both.

Rider – Mitch – Intermediate Skiboarder